黄金彩票app下载v1.0 Heat preservation heating plate for soup pot_ Silica gel electric heating plate Shanghai zhuanghao Electric Appliance Co., Ltd

500彩票app下载2020app

Silica gel electric heating plate  / 
Heat preservation heating plate for soup pot
key word: Silica gel electric heating plate, soup pot heat preservation heating plate, oil barrel heating plate
Product introduction: Silicone rubber heating plate is very thin, lightweight and flexible. With this kind of heater, it can fully contact with the object to be heated, which can transfer heat to any place needed, improve heat transfer in the process, accelerate the temperature rise and reduce the power requirement. It has the characteristics of good waterproof performance, fast heating, uniform temperature, high thermal efficiency, good toughness, in line with the U.S. ul94-v0 fire resistance standard, easy to use, safe life up to 10 years, not easy to aging. The silicone rubber heating plate has stable quality, moisture resistance and chemical corrosion resistance. The temperature range can be from - 62 ℃ to 235 ℃, and the maximum power load can reach 3.1 w / C m2. Because the product is very thin and has good heat transfer effect, the actual heating element is very close to the workpiece. At present, there are two kinds of circuit forms, one is etching circuit method, the maximum width can be 360mm, and the length is unlimited; the heating element is a sheet-shaped electric heating element structure, which provides more uniform thermal field than the wire type electric heating element, with fast heating time and response time. Compared with the wire type electric heating element, it has lower power load and longer service life. The other is the arrangement of round wire heating elements. It is widely used in industry, medicine, laboratory, food and aviation.
Product parameter requirements Back to list

Features of silicone rubber heating plate:

1. Various shapes and sizes can be customized according to the customer's requirements (such as round, oval, and vertebral shape) .... )。

2. The insulation layer of silicone rubber heating plate is composed of silicone rubber and glass fiber cloth. It has high insulation performance, and the breakdown voltage can reach 20 ~ 50kV / mm, so it can be used safely.

3. The installation of silicone rubber heating plate is very convenient. It can be vulcanized at room temperature. It can also be installed according to the customer's requirements or in the form of bundle.

4. For heating element: the heating wire of nickel alloy is wound on glass fiber, the heating power can reach 2.1 w / C m2, and the heating is more uniform.

The silicone rubber material provides longer anti chemical life.

Technical parameters of silicone rubber heating plate:

1) Maximum temperature resistance of insulation material: 250 ℃

2) Maximum service temperature: 250 ℃ - 300 ℃

3) Insulation resistance: ≥ 5 m Ω

4) Withstand voltage strength: 1500V / 5S 5) power deviation: ± 8%

6) Withstand voltage: > 5 kV,

7) Minimum 20 mm × 60 mm thickness 1.5 mm (minimum 0.8 mm, maximum thickness 4 mm) lead length: standard 200 mm, please contact us if the size exceeds the above.



Product details display
  •  Original (480) copy.jpg



Product advantages

Instructions for silicone rubber heating plate

1. When using this kind of electric heating device, attention must be paid to that its continuous working temperature should be less than 240 ℃ and its instantaneous temperature should not exceed 300 ℃.

2. The silica gel electric heating device can work and be pressed, that is, the auxiliary pressure plate is used to make it close to the heating surface. The current density can reach 3 W / C  ̄ 2 when the temperature of working area is not more than 240 ℃.

3. The allowable working temperature is less than 150 ℃ under the adhesive installation condition.

4. In case of dry burning in the air, the power density should be less than 1 W / C  ̄ 2 due to the temperature resistance of the material; under the non continuous condition, the power density can reach 1.4 w / C  ̄ 2.

5. The selection of working voltage is based on the principle of high power high voltage and small power low voltage. Special needs can be excluded.

Silicone rubber heating plate It can be used to:

In the case of direct heating tank, hot tank, hot drum and other places, it can be used on the surface of heating tank,

2. Refrigeration protection and auxiliary heating of air conditioning compressor, motor, submersible pump, etc,

3. Medical equipment such as blood analyzer, test tube heater, health care body shaping clothes, slimming belt to compensate heat, etc.   


Produce / production and inspection equipment
We focus on the production of industrial electric heating elements, have successfully designed electric heating products for many customers, and provide corresponding technical support. The electric heater has been used by many domestic and foreign large and medium-sized enterprises engaged in the related machinery manufacturing industry. It is used to replace the imported similar electric heating products and has won the trust of users. We strive to deliver high quality products at reasonable prices to customers at the right time.
Automatic pipe bender
Automatic winding machine
Local annealing equipment
 DSC_ 0155_ Copy_ Copy.jpg
High protection flange heating pipe

Qualification

Qualified enterprises

Shanghai zhuanghao Electric Appliance Co., Ltd
Main products of the company: Heating tube Pipe heater Air duct heater Welcome to inquire and purchase.

Copyright - Zhuang Hao website